- Intake gauge pass on the club you bring
- Baseline flight capture on the monitor
- Single-variable testing across length, lie and shaft
- Printed and signed specification sheet
- Fee credited against a build placed within 60 days
- Gauge pass on every club currently in the bag
- Yardage ladder built from measured carry, not from stamps
- Driver, fairway, hybrid, iron, wedge and putter blocks
- Cold-weather column on the driver page
- Multi-page specification, filed and reissued free for five years
- $100 credited against a build placed within 90 days
- Wrist-to-floor and height measurement with growth notes
- Set composition advice — how many clubs, which ones
- Shaft weight targets by club, in grams
- Grip core and build-up plan for small hands
- Written re-check date so you know when to come back
Bench work
Alterations and repairs, priced per operation
No session fee applies to these. Drop the clubs off, collect them after the next build day.
| Operation | Price | Notes |
|---|---|---|
| Loft or lie bend, per club | $8 | Forged and cast heads both accepted; unbendable heads are identified free |
| Full set loft-lie check & bend | $60 | Up to nine clubs, gauge report included |
| Regrip, per club | $5 | Labour only; grips billed at cost |
| Reshaft, per club | $30 | Includes pull, prep, trim, epoxy and post-cure verification |
| Shorten or extend, per club | $18 | Swingweight corrected back into the target window |
| Swingweight matching, per set | $45 | Tip or butt weighting as required |
| Ferrule replacement, per club | $10 | Turned and polished to the hosel |
| Broken shaft extraction | $25 | Head cleaned and re-bored where the epoxy allows |
| Intake gauge pass only | $35 | Measurements and a printed sheet, no fitting time |
How components are billed
Cost plus a stated build fee
We do not mark heads and shafts up to an invented list price. You see what the component costs us, you see the build fee for that club type, and you approve the total before we order. A written quote goes out by email the same day as your session.
Build fees run $30 per wood or hybrid and $25 per iron or wedge, which covers prep, trim, assembly, swingweighting, cure time and the verification pass. Putters are $35 because the length-and-loft work takes longer.
Nothing is ordered on a verbal yes. If you decide to buy the components yourself and bring them in, the build fee is the same.
Session fees are credited. A single-club write-up returns its full $95 against a build placed within sixty days. A full bag document returns $100 within ninety. Junior sizing is credited in full against any junior set built here.
Payment and cancellation
- Card or cash on the day; no deposit taken to hold a bay.
- Component orders are paid at the time of approval.
- Twenty-four hours' notice to move an appointment, otherwise the bay was held for nothing.
- If a finished club misses its written tolerance, the rebuild is on us.
Not sure which line you need?
Tell us what you play and what is bothering you, and we will point at the cheapest thing that would actually help.